Your boat's finish faces a tough battle against salt, sun, and daily wear. Scuffs on the gelcoat, stubborn hull stains, and that chalky, faded look can make a great boat look tired. This is where Septone comes in.
For decades, Septone has been the go-to brand for Australian boaters needing high-quality cleaning, maintenance, and fibreglass repair solutions. They provide the hard-working products you need to restore your boat's pride and protect its value.
Septone has built a solid reputation across Australia and New Zealand, and for good reason. They aren't just a marine brand; they supply products for the tough automotive, industrial, and fleet industries, too.
This means their formulations are tested, reliable, and made to perform. For boaters, this translates to cleaning and repair Septone products you can genuinely depend on. They understand our harsh sun and salt conditions, developing specific solutions to keep your vessel protected and looking its best.
Keeping your boat clean isn't just about looks; it's about maintenance. The Septone range of cleaners makes this job much easier. Stubborn brown stains and waterline scum are a common frustration, but a dedicated hull cleaner and stain remover can lift them fast, saving you hours of scrubbing.
For boats with a lot of aluminium, like tinnies and pontoons, a powerful aluminium cleaner like Ali Brite cuts through corrosion and brings back the shine. And for your regular wash-down, a quality boat wash or a convenient boat wash and wax lifts grime without stripping your boat's protective layers.
Those small dings and scratches on the gelcoat are annoying, but they're also repairable. Septone provides a complete system for DIY fibreglass and gelcoat repairs. For deeper gouges or small holes, a glass fibre filler provides structural strength.
For the all-important finish, a gelcoat repair filler is perfect for fixing those cosmetic chips and scratches, letting you get a smooth, professional-looking patch. We also stock the essentials you'll need to do the job properly, including fibreglass matting for larger repairs and the MEKP catalyst to get your resin to cure hard.
After cleaning, the next step is polishing. Fibreglass can become chalky and dull from UV exposure. The Septone two-step fibreglass polish system is the perfect solution. Step 1 is a 'cut and prepare' paste that buffs away oxidation, light scratches, and that faded look.
This is followed by Step 2, a 'polish and protect' paste that refines the surface to a high-gloss shine and leaves a durable, protective wax coating. Don't forget your glass, either. A quality water repellent for your windscreen is a must-have for better visibility and safety in spray or rain.
Every boat needs a good all-purpose adhesive on board for those quick fixes. Septone offers a high-strength contact adhesive in a convenient aerosol can. It's ideal for re-sticking marine carpet, upholstery, or rubber trim that has started to come loose. It's a must-have item for your maintenance kit.
From a quick wash-down to a full gelcoat restoration, Septone gives you the power to maintain and repair your boat yourself. Get your vessel back in top condition. Browse our full range of Septone products and order online today for fast delivery anywhere in Australia.
While you're stocking up on maintenance gear, make sure you're covered for your next trip. Check out our other key categories, including:
A: Septone products are formulated for the harsh Australian environment. Their marine range is specifically designed to tackle common boating problems like saltwater corrosion, fibreglass oxidation (chalkiness), and stubborn hull staining, making them ideal for boat maintenance.
A: A standard Boat Wash is purely a cleaning agent, designed to lift salt, grime, and dirt. A Boat Wash & Wax does the same cleaning job but also leaves behind a thin, protective layer of wax, which helps to repel water and gives a bit of extra shine.
A: Gelcoat repair filler is a finishing compound. It's designed to fix cosmetic issues like small chips, scratches, and scuffs in your boat's outer gelcoat layer. It's not for large structural repairs, but is perfect for making your hull look new again.
A: For the best results on an oxidised or faded boat, yes. The Step 1 'Cut & Prepare' is a cutting compound that buffs away the dull, chalky layer. The Step 2 'Polish & Protect' then refines this surface into a high-gloss shine and seals it with a protective wax. Using both gives you a complete restoration.
FREE SHIPPING 
